Downlights

*IMPORTANT NOTICE*
tp24 dimmable lamps must only be used with tp24 dimmer switches or those from approved suppliers. If used with an unauthorized dimmer switch this will void your warrenty and may damage your lamps contact us for more information: sales@tp24.com 

Get your dimmer switch HERE

• Professional Trailing-Edge Dimmers (V-Pro). 
• Our most versatile dimmer switch. 
• High quality UK design and manufacture. 
• Trailing edge for smooth, totally silent dimming. 
• Intelligent detection of the lamp type for adaptive control of most loads. 
• Overload protection. Superb performance with most dimmable LED lamps. 
• Soft start and gentle waveform to considerably extend lamp life.

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Complete with Replaceable,  Dimmable, Cool White, 4000K LED, G40 Bulb

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

Pre-Wired terminal connection for use where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

• Plug & Play, just wire the first connector (Terminal Block)

• Plug & Play, just wire the first connector (Terminal Block)

• Plug & Play, just wire the first connector

• Plug & Play, just wire the first connector

• Plug & Play, just wire the first connector

• Plug & Play, just wire the first connector

• Plug & Play, just wire the first connector

• Plug & Play, just wire the first connector