Downlights

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• 74 MM Cut out size 
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• 74mm Cut out size 
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

Guidelines as follows

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top
• 50m Depth. Ideal for small recesses 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Guidelines as follows

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Guidelines as follows

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Guidelines as follows

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Guidelines as follows

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Guidelines as follows

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Guidelines as follows

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

• Plug & Play, just wire the first connector
• IP65 for bathrooms, 30, 60 & 90 minute fire rated, air sealing & sound proof
• Compliant with building regulations and sustainable code
• Minimal electrical skill required to fit
• No fire hood required, roll insulation straight over the top

Guidelines For Ordering As Follows: 

Example circuit of 10 Downlights:

• 1 Terminal Connection Cable (5710) required per circuit
• 9 Linkage Cables (5712) required
• 1 End Cap (5715) required

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

74MM Bimetal Hole Cutter 

This Bundle Includes

5788 74MM Bimetal Hole Cutter Tool

5782  Mandrill Hole Cutter 7/16" Tool

This drill set is designed to cut the holes needed to fit our G40 downlights.

5751 G40 Chrome Round Bezel 

Pre-Wired terminal connection suitable for use as a replacement where existing wiring is in place 

*Hole cut out size 74mm 

*Double insulated with optional earth 

5752 G40 Satin Silver Round Bezel 

5750 G40 White Round Bezel 

Mandrill Hole Cutter 7/16"